Rogers & Spencer Revolver Conversion Cylinder
This conversion cylinder converts a Euroarms Rogers & Spencer revolver from .44 black powder to .45LC/.45Schofield smokeless ammunition. Taylor's does not recommend shooting ammunition rated above 850 fps in this conversion cylinder. Reloading/loading is done by removing the cylinder and then removing the cylinder cap from the cylinder. The cylinder contains 6 firing pins retained by threaded doughnuts. The cap is reinstalled by lining up the hole in the cap with the silver guide pin on top of the cylinder. If shooting black powder ammunition the firings pins must be removed and cleaned to avoid corrosion. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations. Cylinders ship separate from firearms purchases.