My Cart

Uberti 1858 Remington .44 Revolver Stainless Steel Conversion Cylinder

Uberti 1858 Remington .44 Revolver Stainless Steel Conversion Cylinder
In stock
SKU
Uberti Remington Stainless Conversion

This stainless conversion cylinder converts stainless steel Uberti 1858 remington revolvers from .44 black powder to .45LC/.45Schofield smokeless ammunition. Taylor's does not recommend shooting ammunition rated above 850 fps in this conversion cylinder. Reloading/loading is done by removing the cylinder and then removing the cylinder cap from the cylinder. The cylinder contains 6 firing pins retained by threaded doughnuts. The cap is reinstalled by lining up the hole in the cap with the silver guide pin on top of the cylinder. If shooting black powder ammunition the firings pins must be removed and cleaned to avoid corrosion. The finish option of fluting is available to have flutes cut into the body of the conversion cylinder or to have a smooth cylinder with no fluting. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

If you order the conversion cylinder and gun on the same order Taylor's will fit your conversion cylinder to your gun at no charge before it ships out as a complimentary service. Cylinders must ship separate from the black powder revolver if purchased at the same time and this may result in additional shipping charges.

Grouped product items
SKU Product Name Stock Qty
PAR/URM102NK Uberti 1858 Remington .44 Revolver Stainless Steel Conversion Cylinder
$270.00
SKU: PAR/URM102NK
Stock: In stock
In stock
PAR/URM102FN Uberti 1858 Remington .44 Revolver Stainless Steel Fluted Conversion Cylinder
$300.00
SKU: PAR/URM102FN
Stock: Out of stock
Out of stock

This stainless conversion cylinder converts stainless steel Uberti 1858 remington revolvers from .44 black powder to .45LC/.45Schofield smokeless ammunition. Taylor's does not recommend shooting ammunition rated above 850 fps in this conversion cylinder. Reloading/loading is done by removing the cylinder and then removing the cylinder cap from the cylinder. The cylinder contains 6 firing pins retained by threaded doughnuts. The cap is reinstalled by lining up the hole in the cap with the silver guide pin on top of the cylinder. If shooting black powder ammunition the firings pins must be removed and cleaned to avoid corrosion. The finish option of fluting is available to have flutes cut into the body of the conversion cylinder or to have a smooth cylinder with no fluting. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations. 

If you order the conversion cylinder and gun on the same order Taylor's will fit your conversion cylinder to your gun at no charge before it ships out as a complimentary service. Cylinders must ship separate from the black powder revolver if purchased at the same time and this may result in additional shipping charges.

More Information
SKU Uberti Remington Stainless Conversion
Manufacturer Made In USA
Write Your Own Review
You're reviewing:Uberti 1858 Remington .44 Revolver Stainless Steel Conversion Cylinder
Your Rating
No Content